Condé Compressor Units
Condé Rotary Vane Dry Air compressors are ideal for a range of aeration needs where pond and lake depths range from 5 feet to 20 feet. No other type of compressor can offer the combination of air flow output, horsepower efficientcy, and cost effectiveness at such a wide range of pressures. Remember, each foot of water depth will require approximately 1/2 psi to overcome. So, if your pond depth is 15 feet, you will need a compressor that can attain pressures of at least 7.5 psi (usually it is safe to add another two psi for compressor needs to make up for elbows and pressure loss over the length of tubing). Condé Dry Air compressor units come complete with pump, motor, drive system, pressure relief valve, intake filter and check valve.
| Part No. | Description | |
| DAUN02908 |
Model 2, 1/2 hp compressor. Will power up to six, 6″ air stones. |
|
| DAUN03948 |
Model 3, 1.5 hp compressor. Will power up to 12, 6″ air stones. |
|
| DAUN03950A |
Model 3, 2 hp compressor. Will power up to 18, 6″ air stones. |
|
| DAUN06944 |
Model 6, 3 hp compressor. Will power up to 28, 6″ air stones. |
|
| DAUN12965 |
Model 12, 5 hp compressor. Will power up to 40, 6″ air stones. |
|
| DAUN12976 |
Model 12, 7.5 hp compressor. Will power up to 56, 6″ air stones. |
|
| DAUN12979
|
Model 12, 10 hp compressor. Will power up to 66, 6″ air stones. |
Pump Accessories
| Part No. | Description | |
| GAGE021 GAGE011 RVP10 RVP13 |
0-30 PSI gauge 0-30 PSI gauge, liquid filled Relief valve for Model 2 and Model 3 Relief valve for Model 6 and Model 12 |
|