Our motto is reasonable vacuum at a reasonable price. High vacuum units (over 20” Hg) are designed to maintain as high a level of vacuum as possible at the tree, overcoming leaks in the system. A practical way of overcoming leaks in a cost effective manner is to oversize the pump unit. Additional air flow in the pump will overcome leaks, maintaining a higher vacuum level at the tree. The information below is a guide for sizing pumps. It is recommended to upsize to the next larger vacuum pump unit for best results.
 |
VACUUM UNITS |
| High Quality Units Designed for the Maple Industry
|
 |
 |
- Gasoline or Electric Powered
– Choose the accessories you need to tailor to your sugar bush specific needs.
- Available in 8, 17, 38, 54 and 90 CFM Models (@15” Hg)
– 1.5 to 10 hp electric. 5.5 to 13 hp gasoline. Electric or Pull Start
- 18” Hg of Continuous Vacuum, Reasonable Vacuum at a Reasonable Price
- Belt Guards are Standard
– Years of research have taught us that belt drive units perform best over time.
- Relief Valve, Check Valve, and Vacuum Guage Included
– Relief valves protect your tank and pump unit and should be included in any system.
- Oil Catch System and Automatic Oiling standard for easy trouble free operation
- Rigid Design Base
– Lower vibration and noise means longer life and lower maintenance of your unit.
- Condé Quality Construction
|
| TECHNICAL SPECIFICATIONS |
 |
| Condé Raised Base units include vacuum pump, motor (gas or electric), raised base on sturdy legs, vacuum relief valve, check valve, oil catch muffler and vacuum guage. A variety of Conde Vapor Oil pump packages from 8 to 80 cfm are available. Conde Vapor Oil pumps require little maintenance and oiling system is automatic. Simply put oil in oil reservoir and run! Honda engine packages in pull or electric start versions. Electric motors in single or three phase options. |
|
 |
| Condé Standard units offer an economic alternative with the same high quality standards built into every unit. Standard units come with vacuum pump, engine or motor, check valve and vacuum relief valve. The optional Oil Catch Muffler is recommended with these units. |
|
PERFORMANCE SPECIFICATIONS
|
| MODEL |
CFM @ 18” Hg |
NO. OF TAPS |
| 3 |
5.0 |
500 |
| 6 |
11.0 |
1100 |
| SUPER 6 |
20.0 |
2000 |
| SDS 6 |
30 |
3000 |
| SDS12 |
53 |
5300 |
|
| Oiling System |
Automatic |
| Oil Type |
Synthetic, 10W-30 |
| Maximum Contin. Vac. |
18” Hg |
| Warranty 3,6, Super 6 |
1 Year |
| Warranty SDS 6, SDS 12 |
1 Year |
|
 |
|
| |